Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: enytned1 on April 11, 2006, 06:53:35 PM

Title: Computer crashing when using Mach2
Post by: enytned1 on April 11, 2006, 06:53:35 PM

I am having a reoccurring problem when modifying or using Mach2.  My
computer freezes and I have to reboot, this is happening when I am
using Mach2.  This is usually happening when I am modifying settings,
sometimes it also occurs when I am in idle mode meaning no activity
other than Mach2 running.  Am I doing something wrong in terms of
setup of my computer and Windows.  Why is this happening?  Any help
would be appreciated.

The version of Mach2 is 6.11d.
Machine is Techno Isel Model 27


Thanks,
Alex

Title: Re: Computer crashing when using Mach2
Post by: Brian Barker on April 11, 2006, 07:46:49 PM

Please look into this http://www.machsupport.com/optimisation%20XP.txt

Title: Re: Computer crashing when using Mach2
Post by: enytned1 on April 11, 2006, 09:42:02 PM

Thanks for the help.  One of those settings must have solved my problem.
I will see if this problem reoccurs again.

Thank you,
Alex