Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mike.lott on January 04, 2023, 08:53:32 PM

Title: NVCMV2.1 Controller Board help with Mach3 setting up
Post by: mike.lott on January 04, 2023, 08:53:32 PM

setting up NVCMV2.1 Controller and trying to program the basic like pins and over all setup.  I have the board wired up and is working the CNC.  Just need help with inputs and outputs spindle because I am new to this.   I do have a 100-watt laser that I use but this is a little different.   Any help would be appreciated.

Title: Re: NVCMV2.1 Controller Board help with Mach3 setting up
Post by: Graham Waterworth on January 05, 2023, 08:43:03 AM

Sorry we do not support NOVOSUN products on this forum due to there trading practices.