Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: frapo on July 14, 2022, 04:22:06 AM

Title: part zero
Post by: frapo on July 14, 2022, 04:22:06 AM

In mach 3 you had a button part zero to set your workpiece 0 point,how do i set the workpiece 0 point in mach 4.

Title: Re: part zero
Post by: thosj on July 14, 2022, 08:38:11 AM

Move to say the X position you want to be part zero and click Zero X next to the X DRO. Or am I missing something? You can also move to a known distance from where you want part zero, with an edge finder, for example, and click in the X DRO and enter a number, say half the edge finder diameter.

Title: Re: part zero
Post by: Cbyrdtopper on July 14, 2022, 03:17:37 PM

The Offset Tab is a great place to look at for setting your work coordinate zero.