Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: oroszt on October 27, 2007, 05:27:46 AM

Title: VNC possibilities
Post by: oroszt on October 27, 2007, 05:27:46 AM

I have a Mach3 controlled five axis system with Windows XP. The OS is optimized (http://www.machsupport.com/optimisation%20XP.txt) for the Mach3, except the ACPI things.
The computer is a Fujitsu-Siemens under the hood Intel 845GE chipset with integrated Xtreme graphics, Intel Pentium 4 2.4 GHz CPU and 1 GByte RAM.
I'm thinking in the remote managing possibilities.
First I will make some test with DemoForge Mirage mirroring driver (http://www.demoforge.com/dfmirage.htm) and Meta (http://metavnc.sourceforge.net/)|TightVNC (http://www.tightvnc.com/), but before I have a simple question for you.  :)

What is your opinion for that?