Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: pumpa on October 27, 2007, 02:27:03 AM

Title: White blank screen.
Post by: pumpa on October 27, 2007, 02:27:03 AM
Mach3 problem!!!!

Had Mach3 running fine under xp and i really don't know what i did, but now when i boot up Mach3 mill i just get a white screen.
This doe's not happen with Mach3 turn or Plasma, can someone please shed a bit of light. >:(
Title: Re: White blank screen.
Post by: Graham Waterworth on October 27, 2007, 04:40:51 AM
Do you get a window with a white background or is the whole screen white with no window border?

Graham.
Title: Re: White blank screen.
Post by: pumpa on October 27, 2007, 04:56:34 AM
Just a window that mach is displayed in, not the whole screen.
Title: Re: White blank screen.
Post by: Graham Waterworth on October 27, 2007, 05:33:37 AM
OK,

If the View menu is showing select load screens, then select 1024.set and open

If this dose not fix it then its a reload of mach.

Graham.
Title: Re: White blank screen.
Post by: pumpa on October 27, 2007, 07:01:08 AM
1024.set was a sure fix, i thank you kindly Graham.
I still don't know what i did to bring up the white screen in the first place.

Cheers Lou.