Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: Gerhard_68 on May 29, 2022, 05:30:35 PM
-
Hi
I have installed the Manual Lathe Screen (Mach4_Manual_Lathe.m4prof).
If I switch from AUTO screen to Manual screen, there is always
the blue toolpath window overlayed as shown in attached pic
BR
Gerhard
-
And how do you install this screen?
-
Hi
have problem solved
in toolpath config was a checkbox
„use frame“ or so
If I uncheck it, the toolpath in the manual screen was disappeared
BR
Gerhard
-
But how do install this screenset or screen,
-
Hi,
But how do install this screenset or screen,
Typically to change a screen set requires that Mach4 is running and with the <View> tab choose the <Load Screen> item and chose from the available screen sets. If you select a new screen set
when you shut down Mach your screen set preference will be updated courtesy of the ScreenUnLOad script.
Second way to do it is to create a new profile whereon you can select a particular screen set.
Craig