Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: Chip on October 24, 2007, 04:53:55 PM
-
Hi, Art & Brian
Arc's with no end lines have problem's, Extra Rapids ?.
Hear two views, one with Offset's and the Lset file
Thanks, Chip
-
Hi, Art & Brian
With a Line connecting two of the arc's and Lset file
Thanks, Chip
-
Chip:
Thx, we have that one tagged to look into on next lcam update. I know the error, its due to the leadin code breaking the arc and recreaeting it as a circle..
(The extra rapids point though does go away if cleaned with a tolerance high enough.. )
-
Hi, Art
"(The extra rapids point though does go away if cleaned with a tolerance high enough.. )"
Are you talking about the setup load toll., tried .01 .001 .0001 .00001 , Zooming, Cleaning after moving start points.
Yes if you don't move any start points, the extra rapids aren't there.
Thanks, Chip