Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Azalin on December 13, 2021, 03:06:25 PM

Title: Mach4 Canned Cycles
Post by: Azalin on December 13, 2021, 03:06:25 PM

When I select the "Canned Cycles" in the wizards list nothing happens.

My Mach4 Hobby is licensed.

Am I missing something?

Title: Re: Mach4 Canned Cycles
Post by: joeaverage on December 13, 2021, 07:19:18 PM

Hi,
to my knowledge Mach4 does not have any canned cycles. The lathe profile does however have canned cycles, and they are supplied by MachMotion not NFS.
As a consequence the code is in complied form, that is to say you cannot view/edit the source code.

I'm guessing here, but I think the two files (CannedCycles.mcc and CannedCyleImages.mcc) in Mach4Hobby/Wizards folder are in fact placeholders for the corresponding files in the Lathe
Canned Cycles sub-folder.

Crag

Title: Re: Mach4 Canned Cycles
Post by: Azalin on December 14, 2021, 01:58:51 AM

Thanks Craig.