Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bruce Hodgkins on September 25, 2021, 08:19:43 PM

Title: 6040 cncest
Post by: Bruce Hodgkins on September 25, 2021, 08:19:43 PM

Hi I am currently running mach3 on my mill. Do the chinese machines work successfully using Mach 4

Title: Re: 6040 cncest
Post by: Graham Waterworth on September 26, 2021, 04:10:37 PM

Only with a MACH4 compatible motion controller, the Chinese don't make them so you need to look at the US or Europe for one.

Title: Re: 6040 cncest
Post by: Bruce Hodgkins on September 26, 2021, 04:33:47 PM

Thanks for the help