Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: mikeeant on September 08, 2021, 09:42:12 AM

Title: gcode generator
Post by: mikeeant on September 08, 2021, 09:42:12 AM

we are using a drag knife with mach4. we cut logo mats. what program should i use to generate the cnc file?

Title: Re: gcode generator
Post by: Tweakie.CNC on September 08, 2021, 10:18:39 AM

Vectric Aspire would be worth lookin at.

Tweakie.