Machsupport Forum
Third party software and hardware support forums. => HiCON Motion Controller => Topic started by: DFitz on August 27, 2021, 03:22:54 PM
-
If anyone can help me with this problem, I'd be so grateful....
The Current Position does not update when I move any axis. The Machine Coordinates on the diagnostics screen shows my position, but the Current Position values don't change - (no change with jogging or g-code). I'm homing with limit switches, and that all works fine. Everything else seems to work as normal, but I cannot figure out how to fix this.
I'm running Mach4 Hobby, and a HICON 7766, with steppers (no encoders).
Cheers.
David.
-
Turns out it was my stupidity that caused the problem. I had Motors 0-2 enabled in the Aux. Positions tab.