Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: hitchhiker on August 01, 2021, 09:08:27 AM
-
hi i have a old vfd from siemens.
it used a Protocol with the name USS.
it works over terminal via rs485 adapter.
but i want to use the vfd with mach3.
i use the vfd with pwm to 0-10V and 2 Relays.
first relay for start stop
second relay for left/right
works fine but is it possible to use the vfd via modbus or a plugin?
i attached the protocol pdf file
-
Hi i own a old VFD wich works via rs485
the Protocol is the USS Protocol from siemens.
is it possible to use the vfd with mach3 via rs485?
its not modbus!
thanks