Machsupport Forum
Mach Discussion => FAQs => Topic started by: aussiejim on July 14, 2021, 07:10:37 PM
-
I am setting up a 4th rotary axis on my 3 axis cnc router, using my x axis as the rotary. I have got he 4th axis moving but the direction is going backwards and forwards,a turn or two in one direction then goes in the other direction. Can someone please help its obvious that I have my settings wrong in my ports and pins somewhere but where. Please help :'(
-
Check the rotational settings in 'General Config' you may have short route checked on and rollover set on.