Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: racear2865 on October 16, 2007, 01:54:25 PM

Title: Probe system
Post by: racear2865 on October 16, 2007, 01:54:25 PM

Want to install a probe system that will talk with Mach3. Will only ise probe to find location. Would appreciate if any one can point me in  the direction of a probe system taht does this.
racear

Title: Re: Probe system
Post by: vmax549 on October 17, 2007, 07:56:20 AM

The TP100 probe from IM services works , also any probe that oputs a simple open close signal will work.

Title: Re: Probe system
Post by: racear2865 on October 17, 2007, 09:16:07 AM

Thanks a bunch, will take a look at.
racear