Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: bigbigjimbo on October 15, 2007, 11:11:56 AM

Title: Emco Compact 5 lathe conversion from the article in the digital machinist
Post by: bigbigjimbo on October 15, 2007, 11:11:56 AM

It the conversion detailed in the Digital Machinist article of  2007 summer issue.
Can any one who has done this conversion tell me if it will control the auto turret through Mach or does further modifications have to be made.
Jim

Title: Re: Emco Compact 5 lathe conversion from the article in the digital machinist
Post by: bigbigjimbo on October 15, 2007, 11:03:23 PM

Disregard this post I was so excited I did not notice that the fix is for the Compact 5 PC not the Compact 5 CNC Machine
Sad!!

Title: Re: Emco Compact 5 lathe conversion from the article in the digital machinist
Post by: dfurlano on October 17, 2007, 10:28:31 AM

nm