Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: chruska on May 05, 2021, 10:46:17 AM

Title: fanuc robodrill
Post by: chruska on May 05, 2021, 10:46:17 AM

i bought a fanuc robodrill. and im getting a 251 atc alarm. to get rid of the alarm you have to use a g49, and it will change tools. but when  you add a g43h1 to control tool length, you get the alarm. please help.

Title: Re: fanuc robodrill
Post by: Graham Waterworth on May 05, 2021, 06:53:59 PM

Use the G49 command.