Machsupport Forum

Mach Discussion => Brains Development => Topic started by: ssspurlock on April 13, 2021, 05:11:08 AM

Title: Modbus I/O
Post by: ssspurlock on April 13, 2021, 05:11:08 AM

Output 1 works without configuration in ports and pins.  The other outputs do not work no matter what I enter in ports and pins.  On the Diagnostics page, the 1,3 and 4 outputs change to flashing red whenR3.043.062 the spindle, flood and mist buttons are toggled.  Only output 1 actually changes state in Brain view.  What am I missing?  BTw, this works the same way on two different computers. Using Mach version R3.043.062.