Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ioant2712 on March 03, 2021, 07:28:00 AM

Title: interface board doesnt provide signals during tests
Post by: ioant2712 on March 03, 2021, 07:28:00 AM

hi. i connected the board to a windows xp working computer using paralel port and usb port, i configured it with the right port adress, but there are no signals provided to the board according to the configarations i have done. only Relay and PW LEDs are on. its the first time i am using this. i hope for some sugestions. thank you.