Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Slow Mem on February 20, 2021, 09:19:00 PM
-
I have Aspire, drew a test with a few designs and exported it. I cant get it to show but some of the drawing and it is skewed to upper right of center (view in Mach 3) I used "Mach 2/3 ARCH-inch" to export the file.
Second test i used same parameters, made sure all tool paths were selected and out of a 4 letter word (STOP) all i got was a "ST" and i had to seriously play with the view window (in Mach 3) to even see that.
My problem is i only have a little time here and there to play with it and its really frustrating. I hope it is something simple, i know I'm doing something wrong but just don't know what it is yet.
Thanks for any help