Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bruce Hodgkins on January 22, 2021, 09:04:01 PM

Title: limit switches
Post by: Bruce Hodgkins on January 22, 2021, 09:04:01 PM

Hi I have set up limit switches  in NO configuration on a 6040 chinese router. I cannot get Mach 3 to recognise the switches. I have tried many different settings in ports and pins without success. Machine has a Bitsensor bob HELP

Title: Re: limit switches
Post by: joeaverage on January 23, 2021, 12:13:52 AM

Hi,
your post belongs on the Mach3 General Discussion board, this board is for Mach4.

The Bitsensor  controller board, also called the RnR controller board, is famous for giving people grief trying to get them to work, they
are in short Chinese crap, you've got what you paid for.

They do not work with Mach4 at all.

Craig