Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ziga on October 09, 2007, 09:54:00 AM
-
hi.
I Would like to use A and B axes on my cnc mill, but i would use tham for the rotation. How do i specify that the units are not mm but °, and how can i configure mach3mill to give me a display for A and B axs like i have it for X, Y, Z, and 4?
-
You just tell it the steps per unit and you are good to go :)
-
You can modify the screen set using screen 4 to add the dros.
Brett
-
chaoticone what you mean sreen 4 like a program, couse i have 0 experience in programing with visual basic.
Brian it is true i can set step per unit, but the defult units are mm or inch, can i set anyvere degrees, couse it would look nicer.
-
Screen 4 should have came with Mach. If it didn't, look in the downloads section for it. It is a program for writing screens. THere are also tutors on it as well.
Brett
-
Thanx, i found it i just posted to soon
I didnt realise how easy it is to create costum screen :)