Machsupport Forum
Third party software and hardware support forums. => dspMC/IP Motion Controller => Topic started by: Terryh on January 16, 2021, 01:59:09 AM
-
Hello
Several years ago in the process of collecting parts for a cnc retirement project I bought a Dspmc 7762v2.
Now with the machine nearing completion I've discovered I can't get either of my laptops running windows 10 and windows 8 to rocognise
and connect with it. Both have been configured according to the manual but don't show up on the recently downloaded VSI. I'm wondering if
I require additional software but none was supplied.
Thanks
-
Hi Terry,
No additional software needed.
The Vital guys will respond shortly with an answer.
Mike
-
Thanks
In the meantime I ordered another controller from CS Labs but If I can get the Dspmc working I will use it for another machine.
-
Please email support with a brief on the problem. We shall send you the right files.
https://www.vitalsystem.com/portal/contact.php
Thanks.