Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: davelegg on December 17, 2020, 08:26:12 PM

Title: Homemade table with Mach 3 torch not coming on
Post by: davelegg on December 17, 2020, 08:26:12 PM

I finally got my table running.
Inkscape
Sheetcam Mach3 post processor
Hypertherm 45xp
Home made table
Mach 3 software.
Yesterday I made my first real cut but I had to start the torch manually. It will not come on automatically as it should.
It does shut itself off at the end of the run.
I do not see a M3 code at the beginning of the program as someone on plasmaspider forum suggested.

Title: Re: Homemade table with Mach 3 torch not coming on
Post by: TPS on December 19, 2020, 01:35:44 AM

have you set the right postprocesor in Sheetcam?