Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jjlrperformance@gmail.com on November 19, 2020, 11:39:13 PM

Title: Mach3 Post Processor for Solidworks Cam
Post by: jjlrperformance@gmail.com on November 19, 2020, 11:39:13 PM
Does anyone have a Mach3 post processor for SolidWorks Cam 2019+?

I searched both solidworks forums and here and have found generic ones, that output G80 code that Mach3 does not seem to like. I have not yet been able to figure it out. But since I am working on threadmilling that G80 is important piece of the code.

Thanks!
Title: Re: Mach3 Post Processor for Solidworks Cam
Post by: jjlrperformance@gmail.com on November 20, 2020, 12:19:20 AM
I found one that works with 3 axis for Milling Figured I would post it here to share. You will still need to do some tweaking to meet the needs of your machine.