Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: kevinallein on November 14, 2020, 05:43:54 AM

Title: MACH4 Reference All Axes (Home)
Post by: kevinallein on November 14, 2020, 05:43:54 AM

Hi, I am using MACH4 to control a lathe. I am using the ESS and I can reference X Axis and Z Axis separately and this works nice. However the "Reference All Axes (Home)" button is always grayed out. What am I doing wrong ?

Thanks in advance