Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bob Hepple on October 05, 2007, 10:37:33 AM

Title: Jog Speed in Incremental Move
Post by: Bob Hepple on October 05, 2007, 10:37:33 AM
 ;)Hi
I am puzzled I use my shuttle  and when I set say an incremntal jog, the speed is really slow BUT sometimes it speeds up I dont seem to be able to find how to set this up properly can anyone give me some advise pleas. I find it frustrating that one time the hog speed is acceptable then the next it is really slow (again only in incremental movements) HELP
Title: Re: Jog Speed in Incremental Move
Post by: Brian Barker on October 07, 2007, 10:12:29 PM
Set your feedrate  to be about 60IPM and you should be good to go (Inc moves look at the feedrate for the move)

thanks
Brian