Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Thinder on November 08, 2020, 06:32:13 PM
-
Just got my ESS/tmc3in1 running on my plasma. Post processed some code from sheet cam for mach 4. It strikes and cuts the first feature then hits a Go4 after probing, then sits there. No more movement. I stopped it and rewound the code, now it hits the first go4 after probing and hangs, with no first cut. Any ideas?
-
screen shot of the Gcode.
-
Mach4 has 2 ways of doing a dwell G4 P100 (0.1 of a second) and also G4 X1. (1 second dwell).
Try changing the P to an X