Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bullwy on October 25, 2020, 07:50:23 AM

Title: Index/Timing/Encoder Pokeys57CNC
Post by: Bullwy on October 25, 2020, 07:50:23 AM
Hi, I have connected a mechanical rotary encoder on the lathe, connected to Pokeys57 CNC. The encoder is sending correct signals which I checked in the Poscope. Now in the MACH3 encoder configuration I chose "ultra fast encoder" in the pokeys interface...but i'm now struggling with the DRO to choose. Neither Strue DR0 (#39) nor the MPG 2 Count DRO (#102) are feeding any signal to the Index indicator and the STrue display in MACH3Turn. With DRO 102 i can at last see in MACH3Mill "Settings" that correct data is fed. What DRO do I have chose and what other configuration do I have to make in Mach3?
Title: Re: Index/Timing/Encoder Pokeys57CNC
Post by: yamaruchi1 on November 18, 2020, 11:31:16 AM
Thank you I downloaded the installation successfully