Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Reach4It on October 17, 2020, 03:06:00 PM

Title: rpm is 0 when spindle is on
Post by: Reach4It on October 17, 2020, 03:06:00 PM

my rpm in mach 3 is showing 0 when the spindle is on.    i can set the min max    6000  to 24000  and control it.   but I have no real feedback to the true rpm

i'm wondering if I don't have an output enabled for feedback from the vfd to mach 3?