Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bgagliana on October 06, 2020, 11:24:45 AM

Title: How to slave X to Z and Y to A axis in Mach3?
Post by: bgagliana on October 06, 2020, 11:24:45 AM
Hello all

First time post here, I've scoured the internet and manuals for the answer but stumped..

I'm building a 2 axis hot wire cutter (X + Y) with stepper motors. I've slaved the Y to A axis (vertical motion) with no problem but no success slaving X to Z for horizontal motion.

Using a Sainsmart 4-axis USB CNC Controller Card

Any tips or tricks to slave X to Z is greatly appreciated.

Thanks in advance