Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: shendricks on September 22, 2020, 12:18:20 AM

Title: Pocket and Profile Toolpath Error
Post by: shendricks on September 22, 2020, 12:18:20 AM

Hi All,

Quick question, Im cutting a pocket toolpath with my CNC machine. Once the pocket is complete, and it needs to move over to the profile toolpath, its like the CNC get stuck for a second, and moves the totally wrong location and starts cutting from there. I tried to swop the toolpaths around, to first cut the profile toolpath and then the pocket toolpath, and it does the same. So it seems that between changing toolpaths there are something happening, and Im not sure what.

Any advice please? Im using Mach 4

Title: Re: Pocket and Profile Toolpath Error
Post by: reuelt on September 23, 2020, 12:51:54 AM

you may need to upload your problem tap file for analysis by others.