Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: hemi43 on September 17, 2020, 08:12:18 PM

Title: OverRide limits flashing and can’t shut off
Post by: hemi43 on September 17, 2020, 08:12:18 PM

I’m at wits end !!!!
I tried to modify my Mach3 turn screen so that I could over ride the feed rates, and I’ve messed everything up. I can’t even get the lathe running again.
I tried to reload Mach, but that didn’t help.

The over ride limits LED is flashing, and I have no idea how to fix this because the machine is no where near the limits. There’s nothing in the manual and I can’t find help online. I’m totally lost.

Title: Re: OverRide limits flashing and can’t shut off
Post by: hemi43 on September 17, 2020, 09:52:38 PM

Reloaded Mach again, and installed my XML file. Got the darn thing going again. Very frustrating evening. Time for a beer (s).