Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: scsi on September 15, 2020, 12:35:51 AM
-
Hi everyone!
I have homemade 5 axis head head machine running mach3mill. I ran into c axis limit problem. While it works just fine with 5 axis milling fine surfaces, in a moment it runs into limit and needs to align C axis to continue working, but it is doing it right on material. Is there anyone of you using Mastercam 2018 with modified post to solve my problem?
Sry for bad english!
Thanks for help!