Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: pbw on September 03, 2020, 11:23:19 PM

Title: Mach 3 Z Axis move during cutting with Plasma
Post by: pbw on September 03, 2020, 11:23:19 PM
I'm running Mach3 in plasma mode. All is well except I can't make a Z axis move while cutting.
I have THC UP and THC Down Emulated with the keyboard, Mach3 is "seeing" that the keys are pressed but doesn't respond.
Is there another setting or settings that have to be changed?
Thanks