Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ziga on October 02, 2007, 02:54:09 AM
-
Hi.
I have just finish making my cnc 3 axis mill, using mach 3 demo verzion and i am about to purchase original soon, couse when i try and load a program to make something in 3D with 160 000 lines it only displays to line N1000 than it starts all over again.
Machine still isnt working as it should couse of my powering i only use 1 computer powering when i shoul use 3...
My question is:
Since mach can controll 6axis can it be costumized to control a robotic arm, and instead of a tool path display it would display some kinematic movements, i mean all i would have to do is set some kinematic equations? or is it alot more complicated, if it is does anyone know for any robotic arm control software (i cant find anything on google)
-
Well if anyone is interested in custumaizing mach3 let me know we culd make a project that mach 3 could controll robotic arm, i am actualy not so good in programing, but i can do some math and provaid the kinematic equations for acceleration and sped of the arm...