Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: jon b on August 24, 2020, 05:45:47 AM
-
Hi guys i am looking for a current version of the script to copy into mach 3 for auto zero probe metric version .can anyone point me in the correct direction.
regards Jon UK
-
There are many to choose from but the one I use is at the bottom of this page; http://www.tweakie.byethost10.com/17.htm?i=1
Tweakie.
-
Hay
thank you Twekie just the job ;D
-
Hi Twekie
ive hit a wall trying to set up script for the z touch probe just cant get my head around it . could you possible fill in the blanks on your script ? . touch plate is 40.37mm
maz z travel is 100mm
i think standoff distance above probe has to be greater than 40.37 mm ? beyond me im afraid .
any information gladly received
-
Try this one...
Tweakie.
-
Why should you have hard coded plate thickness?
For portability between different machines/installations, it would be much easier to use value entered in DRO.
For 1024 screen set it is OEMDro 1001 or 1002, and for Big-Tex screen set it is OEMDro 1151
Attached script is from Big-Tex screen set