Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: jshinn1914 on August 12, 2020, 07:40:56 PM
-
I have upgraded for Mach3/ESS to Mach4/ESS. I have been running fine with the Mach3/ESS setup. I have installed the Mach4 and ESS. I have followed everything in the ESS plugin (all info for inputs,outputs,motors, ect). It seems to be communicating with Mach4, however I can't get the motors to engage.
Any thoughts on this?