Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: gabedrummin on August 07, 2020, 10:02:38 AM

Title: POST PROCESSOR
Post by: gabedrummin on August 07, 2020, 10:02:38 AM

I was hoping someone would be willing to share there Mastercam Post for Mach4 lathe . I cant seem to make Mastercam  post out usable code. My arc's are all over the place .I did not have these issues with mach3 what gives?

Title: Re: POST PROCESSOR
Post by: smurph on August 09, 2020, 01:09:07 AM

Just use a Fanuc post.  Mach 4 is Fanuc compatible and both G76 formats will work.  Do not use a Mach 3 post with Mach 4, especially on lathe. 

Steve