Machsupport Forum

Tangent Corner => Bargain Basement => Topic started by: lgr on August 06, 2020, 03:18:53 PM

Title: teknic servo motors , drives and power supply from a 2007 Frogmill
Post by: lgr on August 06, 2020, 03:18:53 PM

I have the above bits, willing to discuss a price depending on how much of it you want. Larry

Title: Re: teknic servo motors , drives and power supply from a 2007 Frogmill
Post by: catch22 on March 31, 2021, 12:28:13 PM

Are the servo motors and drives still available, and if so how many of each do you have.
Thanks Mike

Title: Re: teknic servo motors , drives and power supply from a 2007 Frogmill
Post by: lgr on May 04, 2021, 11:01:26 AM

Sorry for the late reply I had notifications turned off apparently. I have 5 servos, 3 functional, 2  probably need encoders. I have 4  drives.