Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Benzon on July 30, 2020, 07:50:42 AM

Title: M3 Sxx not working on Lathe
Post by: Benzon on July 30, 2020, 07:50:42 AM

Hi :-)

We have a lathe where we are using Mach4 lathe and when we use MDI to run m3 s800 the lathe starts but not at s800 it runs at the minium speed the the screen is at.

The MDI overlooks the S command why?

We have a mill with Mach4 and the same controlbord and here the is no problem running a m3 s800 in MDI...:-(

Title: Re: M3 Sxx not working on Lathe
Post by: Benzon on July 30, 2020, 08:29:18 AM

The PRM is not updating with the new S.