Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Jimmysmill13 on July 27, 2020, 12:00:41 PM

Title: Script Edit Error
Post by: Jimmysmill13 on July 27, 2020, 12:00:41 PM
HI,

I am trying to edit my Goto Work Zero. When I make the edit. It will not allow me to save the edit.  I have a attached pic of error. Any help would be great.

Thanks
Title: Re: Script Edit Error
Post by: thosj on July 27, 2020, 04:48:24 PM
Run Mach4 as administrator, see if that fixes it. Byranna doesn't seem to be around any more to tell every one to try that first thing!!!
Title: Re: Script Edit Error
Post by: Jimmysmill13 on July 27, 2020, 05:47:30 PM
Run Mach4 as administrator, see if that fixes it. Byranna doesn't seem to be around any more to tell every one to try that first thing!!!

Thanks for the reply and help. 

I was able to fine a work around for the Goto Work Zero Button. Apparently if you just activate the A - Axis even though it is not being utilized. It fixes the Goto Work Zero and no longer getting a 3rd axis error. Everything is now functioning properly.