Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: bwprice100 on July 19, 2020, 09:27:35 AM

Title: Increase axis drive speed
Post by: bwprice100 on July 19, 2020, 09:27:35 AM
Hi

I haven't posted on the forum for a while due to illness but I would like some help please.

I have added an intermediate pulley to my X axis and re-calibrated the drive so the distance moved is correct  but now the axis is moving too slowly and I can't speed it up as the drive settings are at their maximum so I am not sure how to speed up the axis further.

Any help much appreciated.

Brian