Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Merlin1965 on July 11, 2020, 05:13:28 AM
-
Hi Guys
A lot of what I do on my 3 axis Mill is modifying existing parts
These parts have a round hole in them that I use as my X0 Y0 reference point
And My code is written from that point
At the moment I use a Axial Dial gauge to find my circle center
I do have the Idea of using a touch Probe
Process being
set probe manually Z,X&Y in hole by eye
The run a function to Move Spindle to find hole center automatically then set X0 Y0 in Mach3
My Question is.... Is this a G Code Program ?
John P
-
Have you tried using the Circle Centre Wizard ?
Tweakie.
-
Have you tried using the Circle Centre Wizard ?
Tweakie.
Thanks
Sometimes i should look with my eyes and not my mouth ( or keyboard in this case )
John P
-
:)