Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: cemoa9 on July 03, 2020, 11:57:12 AM
-
Hello all,
For cycle time and machine lifetime reasons I want to use the Tempest motion planner which was made several years ago for mach3. The only problem I have with it is that the feedrate overide has been disactivated and I really want / need it.
I have been trying to create a macropump which would change the max speed of the axis depending on a potmeter, macro works but the changes do not happen while the program is running.
I also tried using OEMDro and #99********* to specify the feedrate through macropump and potmeter, but again this does not work after program has been started.
Does any of you have a brillant idea how to do that?
Cordially
Cemoa9
-
Hello,
So one thing which works but is not perfect is to have a lot of M1 in the program, when activated and machine stops it updates the max motor speed of all axis following the macro.
Still if somebody gets a better solution...
Cordially
Cemoa9