Machsupport Forum

Mach Discussion => Mach4 General Discussion => Topic started by: Johnny Storm on July 03, 2020, 10:14:34 AM

Title: Mach4 - Square tubing cutting with plasma (4 axis) G-code sample files
Post by: Johnny Storm on July 03, 2020, 10:14:34 AM

Hello,

I am building 4 axis CNC machine for cutting square and rectangular tubes with plasma using MACH4, I have not yet purchased a CAM software, but I would like to do some simulation tests to see how everything looks.

Can any of you share some G-code files compatible with MACH4?

My machine looks like this: https://www.youtube.com/watch?v=i8Vq6vw5Gto (https://www.youtube.com/watch?v=i8Vq6vw5Gto)

Title: Re: Mach4 - Square tubing cutting with plasma (4 axis) G-code sample files
Post by: joeaverage on July 03, 2020, 04:30:02 PM

Hi,
Fusion 360 is free to start-ups and hobbyists and is overall....good.

Vectric seems to be slanted to decorative and/or artistic operations whereas Fusion 360 seems
better at engineering applications.

Craig