Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: fercho41890 on June 04, 2020, 08:49:14 PM

Title: milling problem mach 3
Post by: fercho41890 on June 04, 2020, 08:49:14 PM

hi, im starting with milling cnc, my issue is i create the cam on fusion 360 without problems and set the start point when im in the mach 3 i set the same offset as in fusion 360 but it doesnt work it always appear backwards and dont know why

Title: Re: milling problem mach 3
Post by: fixittt on June 09, 2020, 01:40:40 PM

more information and maybe some pictures are needed.
Is this a router or a mill?  My first guess is that you have one or more axis going backwards.