Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bowber on September 26, 2007, 09:18:43 AM
-
Hi All
Got my last problem sorted with limit switches etc, many thanks to all that helped.
I've what I hope is a simple question.
How do you use the different screen sets that people have created? is it just a simple selection in Mach3 (presume the screen set has to be in the Mach folder) or is there more involved?
Also can you change back to the default set?
I'm just wanting to use a simple 4 axis set without spindle control and just the main buttons on screen, Is there a screen set like this available for Mach3 Mill?
Thanks
Steve
-
Hey Steve,
Yes, it is that simple. At the top of Mach, you should see a tab that says View. Click o that, load screens, if it doesn't come up to the default C/Mach 3 folder, browse to it and select the screen you want to use. It's just as easy to go back to the default set.
You might want to search around for other screen sets.
Brett
-
Hi
Thanks for the reply.
I'll search through the screen sets and try a few.
Steve