Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: doy on May 25, 2020, 04:43:04 AM

Title: spindle control problem.
Post by: doy on May 25, 2020, 04:43:04 AM

when I put the command (G84 code), all the output are off.
This happening is occurred when operating reverse of spindle after forward.
Please recommand me how to fix this problem.

thanks in advance.

Title: Re: spindle control problem.
Post by: Tweakie.CNC on May 25, 2020, 05:39:17 AM

Assuming you are using Mach3 - I don't think G84 was ever successfully implemented so there may be no fix  :'(

Tweakie