Machsupport Forum
Mach Discussion => FAQs => Topic started by: Roy Smart on May 15, 2020, 12:27:50 PM
-
Hi
I have a 2030 machine ( A cheap one from China) and I am having difficulty with the speeds and feeds for cutting 0.5mm to 2mm Styrene Sheet. Whatever speed and feed rate I use the styrene is melting and clogging the cutter. Is there a list somewhere to give me speeds and feeds for various materials.
The only other material I use at the moment is thin plywood 0.5mm to 3mm and there I have no problems at all.
Many thanks for any advice
Regards
Roy