Machsupport Forum
Mach Discussion => Mach4 General Discussion => Topic started by: NiganDong on May 15, 2020, 08:26:12 AM
-
Hi all!
I'm struggeling with my tool measurement. I've developed my own probe and tested that everything works.
I've also made a fully functional M6 tool change macro. Btw, my mill is a Emco VMC-100, with 10 tools.
And now I would like to make a tool measure macro that I can call in the MDI and it will run through all my tools before I start.
I've called it M10. But there seems to be a problem. My first tool, tool 1, is always shorter, or the other tools are longer.